Fingerprint reader – Philips CF-U1 User Manual

Page 41

Advertising
background image

41

Fingerprint Reader

• Enrollment to the biometric device

All enrolled fingerprints are stored directly in the fingerprint sensor. The user data will be secured by the
hardware protection keys obtained by the fingerprint sensor. This mode allows up to 21 fingerprints to be
enrolled.

• Enrollment to the hard disk

All enrolled fingerprints are stored on the flash memory. Hardware protection of the user data is not possi-
ble, but multiple users can enroll their fingerprints.

z

When the [Finish] screen appears, read the description carefully.

z

[User Enrollment] wizard starts. Follow the on-screen instructions.

NOTE

z

Enroll at least 2 fingers. Even if one of them is injured, you can use another one to access your account and secret
data. For further information about the enrollment, refer to “How to Use the Fingerprint Reader” (

Î

page 38

) and [Fin-

gerprint Tutorial].
• Click [start] - [All Programs] - [Protector Suite QL] - [Fingerprint Tutorial].

z

We recommend you use the Power-on Security feature. This feature prevents unauthorized access to the user’s
computer at the BIOS level.
After first finger enrollment, [Power-on Security] message appears. Select [Yes].

A

When the [Power-on Security] screen appears, click [Manage Passwords].

B

Select [Power-On] in [Password Types], and click [Set password].

C

Enter the password for [Power-on Security], and click [OK].

D

Click [Close].

E

Add a check mark for [Power-On] in [Password Types].

F

Enter the password (step

C

), and click [OK].

G

Click [Next].

• Follow the on-screen instructions.

NOTE

z

The number of fingerprints for [Power-on Security] is maximum of 21, because they are stored in the fingerprint sensor
regardless of the selected enrollment mode.

Advertising