Philips CF-U1 - Manual (Page 54)

54
Disabling/Enabling Wireless Communication
„ To enable or disable particular wireless devices
1
Click the Wireless Switch Utility icon to show the pop-up menu.
2
Select ON or OFF for the device you want to enable or disable.
„ To change the function of the wireless switch
In the default setting, the wireless switch enables devices that you select turning the wireless switch off last time. You can
change this function.
[Selects the device for which to turn the device status on each time with the dialog box]
Display a dialog each time you set the wireless switch to ON so you can choose which wireless device to enable.
[Turns on the following device]
Only selected devices are enabled when you set the wireless switch to ON.
[Turns on the device that was on immediately before the wireless switch was turned off the last time]
(default)
When you turn on the wireless switch, the on/off settings that were selected when you last turned off the wireless
switch will be restored.
1
Click the Wireless Switch Utility icon ( or ) on the notification area and click
[Settings].
2
Select the setting you want to assign to the wireless switch.
3
Click [OK].