Disabling/enabling wireless communication, The wireless switch – Philips CF-U1 User Manual
Page 52
52
Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>
There are 3 ways of disabling and enabling wireless communication.
z
The wireless switch is at right next to DC-IN jack.
z
Wireless Switch Utility (
z
Settings in the [Advanced] menu of the Setup Utility (
)
NOTE
z
For further information about Wireless LAN:
z
For further information about Bluetooth:
z
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
1
Open the cover.
A
Slide the latch down to unlock the cover.
B
Open the cover.
To disable all wireless communication
2
Switch (A) to OFF
To enable wireless communication
2
Switch (A) to ON
z
In the default setting, the wireless switch enables all wireless devices when it is set to ON.
NOTE
z
If you uninstall the Wireless Switch Utility, set the wireless switch to ON.
z
Do not turn on/off the switch repeatedly at too short intervals.
The Wireless Switch