Philips CF-U1 - Manual (Page 76)

76
Troubleshooting (Advanced)
A peripheral device does not work. z Install the driver.
z Contact the manufacturer of the device.
z When operation resumes from standby or hibernation, devices such as a
mouse may not function properly. In this case, restart the computer or
reinitialize the device.
z When is displayed in the Device Manager, remove and insert the device. If
the problem persists, restart the computer.
z The computer may not recognize the connection/removal of some devices, or
may not operate normally with some devices.
Operate the following steps.
A Click [start] - [Control Panel] - [Performance and Maintenance] -
[System] - [Hardware] - [Device Manager].
B Select the device and remove the check mark for [Allow the computer
to turn off this device to save power.] in [Power Management]. (This
item may be unavailable for some types of devices.)
The connected mouse does not work. z Check the mouse connection.
USB floppy disk drive does not work
as a boot drive. z You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional).
z Connect the floppy disk drive directly to a USB port of the computer. Do not
connect it via a USB hub or USB connector of the Cradle or the Mini Dock.
z Set [Legacy USB support] to [Enabled] in the [Advanced] menu of the Setup
Utility (
Î page 62 ).
z Set [Boot Option #1] in [Boot] menu of the Setup Utility to [USB FDD Disk].
(
Î page 63 ).
z Turn off the computer and connect the USB floppy disk drive, and then restart
the computer.
You do not know the address map for
IRQ, I/O port address, etc. z To check the current address map, click [start] - [Control Panel] - [Performance
and Maintenance] - [System] - [Hardware] - [Device Manager] - [View] -
[Resources by type].
Cannot print. z Check the printer connection.
z Turn on the printer.
z The printer is not online.
z No paper is in the printer tray or there is a paper jam.
z Turn on the printer and connect it to the computer, and then restart the
computer.
„ Connecting Peripherals