Philips XP AJ 3430 - Manual (Page 10)

10
English
Cancelling the alarm completely
To cancel the set alarm time before it goes off, or during the
alarm call:
• With the radio switched off, press ALARM 1-RADIO or
ALARM 2-BUZZER once or more until the selected alarm
indicator disappears from the display.
Repeat alarm
This repeats your alarm call at 9-minute intervals.
1. During the alarm call, press REPEAT ALARM/ BRIGHTNESS
CONTROL.
™ Display shows
or flashing
during a repeat alarm.
2. Repeat if desired up to 6 times.
ABOUT SLEEP
This set has a built-in sleep timer which enables the set to be
automatically switched off during radio playback after a set
period of time. There are four sleep times before the set turns
itself off: 60, 30, 15 minutes and off.
SETTING SLEEP
1. Press SLEEP/ RADIO ON to switch on the radio.
2. Within 1 second, press SLEEP/ RADIO ON again once or
more until the display shows and SL:60.
While in the SLEEP display, press SLEEP/ RADIO ON once or
more to select your sleep time.
™ Display shows in sequence:
and the sleep
period time options: SL:60, SL:30, SL:15 and OFF.
™ The sleep time and radio frequency appear briefly before
showing standby clock time with the
indicator, if SLEEP is activated.
3. To cancel sleep, press either:
• ALARM RESET/ RADIO OFF
• REPEAT ALARM/
BRIGHTNESS CONTROL
• SLEEP/ RADIO ON once or more until
disappears from the display.
MAINTENANCE
• If you do not intend to use the set for a long time, withdraw
the power plug from the wall outlet.
• Do not expose the set to humidity, rain, sand or excessive
heat caused by heating equipment or direct sunlight.
• To clean the set, use a soft, slightly dampened chamois
leather. Do not use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm the
housing.
USING THE ALARM SLEEP
XP AJ 3430/17 08-05-2000 15:29 Pagina 10