Panasonic DMC-FZ30GN - Manual (Page 21)

Preparation
21
VQT0S12
[SETUP] menu (Refer to P20 for the setting method.)
[MONITOR/VIEWFINDER]
Adjust the brightness of the LCD monitor
(when pictures appear on the LCD monitor)
or Viewfinder (when pictures appear on the
Viewfinder) in 7 steps.
[AUTO REVIEW]
[OFF]: The recorded picture does not
automatically appear.
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. Then
it is enlarged 4 times and appears
for about 1 second. This mode is
useful for confirming focus.
Pictures in auto bracket, burst
mode or pictures with audio are
not enlarged even if [ZOOM] is
selected.
• In motion picture mode [ ], auto review
function is not activated.
• When pictures are recorded in auto
bracket [ ] (P54) or any speed ([ ],
[ ] and [ ]) on burst mode (P56),
the auto review function is activated
regardless of the setting on the auto
review function. (The picture is not
enlarged.)
• When using pictures with audio, the auto
review function works while recording the
audio or the data into the card regardless
of the setting on the auto review function.
(The picture is not enlarged.)
• When the quality is set to [TIFF] or [RAW],
the auto review function works until the
end of recording onto the card. (The
picture is not enlarged.)
• The setting for the auto review function is
disabled in auto bracket, burst mode,
motion picture mode, or when
[AUDIO REC.] is set to [ON].
[PLAY ON LCD]
When Viewfinder is selected in the
recording mode while setting [PLAY ON
LCD] to [ON], the picture automatically
appears on the LCD monitor in review or
playback. (P28)
• Monitor priority is only activated when the
LCD monitor is closed with the screen
facing outwards.