Panasonic DMC-FZ30GN - Manual (Page 88)

Recording Menu Settings
88
VQT0S12
[REC] mode menu (Refer to P78 for the setting method.)
• Be sure of the following points when the
AF assist lamp is in use.
– Do not look into the AF assist lamp.
– Detach the lens hood.
– Do not cover the AF assist lamp with
your fingers when taking a picture.
– The battery may be consumed faster
than usual when using the AF assist
lamp.
• In auto mode [ ], the [AF ASSIST
LAMP] setting is fixed to [ON].
• You cannot use the AF assist lamp in
[SCENERY] (P71), [NIGHT SCENERY]
(P72), [FIREWORKS] (P75) and
[PANNING] (P77) in scene mode.
• When you do not want to use the AF
assist lamp (e.g. when you take a picture
of a subject in a dark place), set the [AF
ASSIST LAMP] to [OFF]. In this case, it
becomes difficult to focus on the subject.
• The AF area is set only to a point on the
centre of the screen when the AF assist
lamp is turned on.
• A vignetting effect may appear on the
circumference of the AF assist lamp
because the AF assist lamp may be
obscured by the lens, however, this does
not cause a problem with the performance
of the camera.
In the [REC] menu (P78), setting [D.ZOOM]
to [2
k] or [4k] allows you to magnify a
subject up to a maximum of 48 times.
(Except when using extra optical zoom.)
Refer to P33 for details.
You can use 4 types of colour effects
depending on the atmosphere of the
picture.
Digital Zoom [D.ZOOM]
Colour Effect [COL.EFFECT]
COOL The picture becomes bluish.
WARM The picture becomes reddish.
B/W The picture becomes black and
white.
SEPIA The picture becomes sepia.
SCN 1 SCN 2