Panasonic DMC-FZ30GN User Manual
Page 93
Recording Menu Settings
93
VQT0S12
4 Set to Tele or Wide.
A: Zoom ring
• Always set to Tele when using a tele
conversion lens and to Wide when
using a wide conversion lens.
• The conversion icon ([
] or [
])
changes from red (blinking) to white.
• When using a conversion lens, ensure
the conversion icon is white when
taking pictures. If pictures are taken
when it is blinking, performance will not
be up to specification.
∫ Recordable range when using the
conversion lens
¢The actual magnification when using
digital zoom (P33) and extra optical zoom
(P33) is 1.7
k that of the Tele display.
• Focus range is from 14 cm to
¶ (wide
conversion lens) and from 5.5 m to
¶ (tele
conversion lens).
• Digital zoom cannot be used when using a
wide conversion lens.
• When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
• Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens.
• When using the conversion lens:
– The built-in flash cannot be activated.
– If you set [CONVERSION] to [OFF], the
performance of the conversion lens will
not be optimal.
• When using the tele conversion lens:
– We recommend using a tripod.
– The stabilizer function may not work
sufficiently.
– The focus indication may light due to the
jitter even if the subject is not focused.
– The time required for focusing may
become longer than usual.
• If you use an extra flash when a
conversion lens is attached, we
recommend setting the extra flash to
manual mode. Refer to the operating
instructions of the extra flash for details.
• If you set [CONVERSION] to [
] or [
],
you cannot use the AF assist lamp. (P87)
• Read the operating instructions of the
conversion lens for details.
Tele conversion lens
Indication
12
k
Actual magnification
20.4
k
¢
35 mm film camera equivalent
714 mm
Wide conversion lens
Indication
1
k
Actual magnification
0.7
k
35 mm film camera equivalent
24.5 mm
T(420)
W(35)
5
1X
420
300
35
(3
50