Playing discs, Erasing a programme that is being played – Panasonic DMR-E60 User Manual

Page 14

Advertising
background image

14

Playing discs

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

Preparation
Switch [DVD, TV]

(19) to “DVD”.

1

Press [

Í, DVD] (1) to turn the unit on.

2

Press [

<, OPEN/CLOSE] (3) to open the tray and

insert a disc.

e.g.: DVD-RAM

(1) Arrow pointing inwards.
(2) Align correctly.
≥Insert label-up with the arrow facing in. (With double-sided

discs, load so the label for the side you want to play is facing
up.)

≥Insert inside the tray’s guides.
≥Insert one disc only.

3

Press [

1] (26).

≥The disc tray closes and play begins.

(The unit takes some time to read the
disc before play starts.)

≥If the Resume function (page 15) is not

active, playback will begin from the most
recently recorded programme.

[RAM] [DVD-R]

≥Play starts from the beginning of the disc. [DVD-A] [DVD-V]

[CD] [VCD] [MP3]

≥If you insert a DVD-RAM with the write-protect tab set to

“PROTECT” (page 65) and press [

<, OPEN/CLOSE] (3),

play starts automatically.

ªTo stop play

Press [

∫] (7). (page 15, Starting play

from where you stopped it)
≥A screen similar to the illustrated may

appear when you stop play. Press [

∫]

(7) again and you can use this unit’s
tuner to watch television.
This screen is also shown when you are
playing CDs.

ªTo pause play

Press [

;] (8).

Press again to restart playing.

ªWith non-cartridge discs

(1) Insert label-up. (With double-sided discs, load so the label for

the side you want to play is facing up.)

(2) Guide for 12 cm (5

q

) disc

(3) Guide for 8 cm (3

q

) disc

When a menu screen appears on the television

[DVD-A] [DVD-V] [VCD]

Operate menus with the following operations. Actual operations
depend on the disc.

Press the numeric buttons

(4) to select an item, or move

[

3, 4, 2, 1] (10) to select an item and press [ENTER] (10).

≥You can return to menus after you start play by pressing

[TOP MENU]

(9) (DVD-Audio, DVD-Video) or [MENU] (27)

(DVD-Video), or [RETURN]

(28) (Video CD).

Note
≥The disc continues to rotate while the menu is displayed even

after you finish playing an item. Press [

] (7) when you finish to

preserve the unit’s motor and your television screen.

For your reference
If “

” appears on the television

The operation is prohibited by the unit or disc.

≥[RAM] [DVD-R]

Play starts from the beginning of the most recent recording. If that
programme is extremely short, play starts from the next most
recent recording. Use “TOP PLAY” in the FUNCTIONS window
(page 23) to start play from the oldest programme on the disc
(programme 1).

Erasing a programme that is being
played

[RAM] [DVD-R]

Since the programme in playback and all the play lists
(page 36) created
during its playback are erased irretrievably,
you should make sure if the desired programme has been
selected before carrying out.

1

During play

Press [ERASE]

(32).

≥The menu disappear about 10 seconds later.

2

Use [

2] (10) or [:/6] (46) to select “Erase”

and press [ENTER]

(10) or [ERASE] (32).

≥Use [1] (10) or [5/9] (46) to select “Cancel” and press

[ENTER]

(10) or [ERASE] (32), or press [RETURN] (28) to

cancel.

Note
≥It is not possible to erase a programme when you are carrying

out simultaneous recording and play (page 22).

≥It is not possible to erase a programme that is in the process of

being recorded.

≥The available recording time on DVD-R does not increase when

you erase programmes.

(1)

(2)

(1)

(2)

(3)

Erase Programme

0 : 58 SP

Erase

Erase
ENTER

SELECT

Cancel

Corresponding PLAY LIST will also be erased.

Remaining Time

RETURN

ENTER

SELECT

Advertising