Panasonic DMR-E60 - Manual (Page 52)

52
Upgrading your system (continued)
Connecting a video cassette recorder
When connecting to the AV2/DV input terminals on the
front of the unit
Audio/Video cable
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
Front panel of this unit
(4) S video cable (not supplied)
(5) Audio/Video cable (not supplied)
(6) 4-pin DV cable (not supplied)
(7) Other playback equipment
≥Connect to the video and audio output terminals.
Note
≥If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
≥The DV input on this unit is for use with DV equipment only.
≥When DV equipment is connected, it is not possible to operate
the unit from the other equipment.
≥Only one piece of DV equipment (e.g., Digital Video Camera) can
be connected to the unit via the DV Input terminal.
≥The picture compression system of the DV equipment you have
connected may differ from that used in this unit. In such cases,
dubbing from these equipments will not be possible.
When connecting to the input terminals on the rear of
the unit
Audio/Video cable
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
Rear panel of this unit
(4) Audio/Video cable (not supplied)
(5) S video cable (not supplied)
(6) Other playback equipment
≥Connect to the video and audio output terminals.
Note
If the audio output of the other equipment is monaural, use a
stereo-monaural conversion cable (not supplied).
(1)
(2)
(3)
(1)
(2)
(3)
AV2
(7)
(4) (5) (6)
(1)
(2)
(3)
(1)
(2)
(3)
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
S-VIDEO
S-VIDEO
A V1 IN
A V3 IN
R - AUDIO - L
R - AUDIO - L
OUT1
OUT2
(5) (4)
(6)