Panasonic BB-HCM381 - Manual (Page 115)

Operating Instructions
115
5. Set the Lens Position When Triggered setting, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you enable the Lens Position When Triggered setting, buffer/transfer of
the post-trigger image starts after the camera turns to the specified
position.
6. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Lens Position
When Triggered • Set the direction to move the lens to the home position,
alarm position (see page 36) or Preset 1–20 (see page 37)
when an alarm signal is detected.
Setting Description
Image
Resolution • Select an image resolution (640 x 480, 320 x 240 (default)
or 160 x 120 pixels) for the buffer/transfer.