Panasonic BB-HCM381 - Manual (Page 60)

Operating Instructions
60
Static Setup
You can assign a static IPv6 address to the camera. If you select [No] for Allow
Access from the Internet, the camera can be accessed only from the LAN that
has an same IPv6 prefix as the camera.
• Clicking [Cancel] takes you back to the previous page without saving
changes.
4. Click [Save] when finished.
• The new settings are saved.
• When finished, the following page is displayed.
Note
• The current network settings are shown on the Status page in the
Maintenance section (see page 161).
5. Click [Restart].
• The camera restarts, and the Top page is displayed.
Note
• When you do not know the camera IP address while setting [Automatic
Setup], you can search for it using the Setup Program (see page 186). Or
you can search for it on the Status page (see page 161) after accessing
the camera in IPv4.
• If the camera is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.