Panasonic BB-HCM381 - Manual (Page 127)

Operating Instructions
127
5. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you enable the Lens Position When Triggered setting, buffer/transfer of
the post-trigger image starts after the camera turns to the specified
position.
6. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Lens Position When
Triggered • Set the direction to move the lens to the home position,
alarm position (see page 36) or Preset 1–20 (see page
37) when motion is detected.
Setting Description
Image Resolution • Select an image resolution (640 Ч 480, 320 Ч 240
(default) or 160 × 120 pixels) for the buffer/transfer.