Panasonic BB-HCM381 - Manual (Page 23)

Operating Instructions
23
1.5 Viewing the Single Camera page
1. Access the camera (see page 19).
• The Top page is displayed.
2. Click the [Single] tab at the top of the page.
• When the Security Warning window is displayed, click [Yes] (see page 25).
• See page 26 for the Security Warning window when using Microsoft
®
Windows
®
XP Service Pack 2.
3. Close the web browser.
Note
• When the camera image is not displayed immediately or correctly, click
[Refresh] on the web browser's tool bar. The image will be refreshed.
• The refresh interval is set to [Motion] by default. The setting can be changed on
the operation bar (see page 29).
• The refresh interval may change depending on the network condition, PC
performance and what object you view. SD memory recording, using IPsec or
enabling Motion Detection will also increase the refresh interval.
Capture Image
Button
(See page 28)
Operation Bar
(See page 29)
Audio Control
Bar (Talk Button,
Listen Button
and Adjustment
Bar)
(See page 40)
Click to Center
(See page 27)
Click the URL in
case of no audio.
Displaying to
operate with
IPv4, IPv6, or
IPsec.
Banner
(optional)
(See page 26)