Panasonic KX-T7565 - Manual (Page 47)

Operation
User Manual 47
2.2.5 Calling without Restrictions
Using an account code (Account Code Entry)
An Account Code gives information about outside calls for accounting and billing purposes. You may
not be able to make an outside call without an account code entry depending on your account code
entry mode. One of three modes is assigned to each extension by System Programming. Ask your
System Manager about your mode.
— Using an account code
— Using your calling privilege at another
extension
— To call an extension who is refusing to
receive the call
— Changing the dialling mode
• A Panasonic Proprietary Telephone user can enter an account code during a
conversation and when hearing a reorder tone after the other party hangs up.
• If you enter the wrong code, press the " " key while entering the account code and then
re-enter the code.
• To cancel the entry, press the Account button <PT>; or press the switchhook lightly
<SLT>; while entering the code.
• For your convenience, you can store the code with the phone number in memory (e.g.,
Speed Dialling).
• If you hear a reorder tone, the entered account code is wrong. Enter the correct code.
• The delimiter "99" is available for rotary type SLTs only.
• The System Manager may give a specified account code to you and check your telephone
usage. The System Manager can specify an account code to each client and check the call
duration.
Press # or dial 99. Off-hook.
phone no.
Enter phone number.
account code
Enter account code
(max. 10 digits).
Press "ACCNT,"
Account or dial 49.
OR
OR
Press CO or enter
line access number
(0 (or 9)* or 801-848).
OR
OR
line access
no.
PT / SLT
C.Tone D.Tone
ACCNT
(CO)
(Account)
D.Tone 3
4 9
9 9
#
*) 0: [SA], 9: Others