Philips Hi-Q Digital Video Recorders - Manual (Page 16)

2. Configure details of the profile by checking the appropriate check boxes as shown below:
16
F IELD V ALUES D EFAULT VALUE E XPLAINED
Profile Name Profile name as selected [profile number] Name of the selected profile.
in the <Edit Profile> screen
Active Alarms
1-Touch Alarm Each channel: Enabled If enabled (box is checked),
(front panel) Enabled or Disabled the corresponding alarm triggers
high quality real time recording.
Video Motion Each channel: Disabled Duration of alarm recording is
(via motion detectors) Enabled or Disabled determined by alarm settings
(see Section 7.4).
Video Dark Each channel:
(capped lens alarm) Enabled or Disabled
Auxiliary Each channel:
(contact closure via Enabled or Disabled
alarm inputs)
Relay Output Each channel: Disabled If enabled, an alarm on the channel
Enabled or Disabled triggers a relay output response.
Record Video Each channel: Continuous Defines type of recording for
• Continuous each channel.
• Event Only Event Only records pre-alarm
• Do Not Record video for the pre-alarm time
(see Section 7.4.1).
Record Audio Camera 1 only: Disabled Audio available on Channel 1
Enabled or Disabled if Video is enabled.
Image Quality Each camera: High Setting image quality lower extends
• High the record time.
• Medium
• Standard Plus
• Standard
Time Lapse Quality Each camera: Real Time Lower time-lapse setting extends
• Real Time (full motion) the record time.
• (NTSC)
2, 5, 10, 15, 30, 60 images/sec
• (PAL)
2, 5, 9, 12, 25, 50 images/sec
Estimated Calculated Calculated Time is estimated and is based
Recording Time on the current profile running
continuously without alarms.
X X X X