Refer to – Polycom SIP 2.2.2 User Manual

Page 98

Advertising
background image

Administrator’s Guide SoundPoint IP / SoundStation IP

4 - 50

Configuring SoundPoint IP / SoundStation IP Phones Locally

A local phone-based configuration web server is available, unless it is disabled

through sip.cfg. It can be used as the only method of modifying phone

configuration or as a distributed method of augmenting a centralized

provisioning model. For more information, refer to

Web Server <httpd/>

on

page

A-54

.

The phone’s local user interface also permits many application settings to be

modified, such as SIP server address, ring type, or regional settings such as

time/date format and language.

Changes made through the web server or local user interface are stored

internally as overrides. These overrides take precedence over settings

contained in the configuration obtained from the boot server.
If the boot server permits uploads, these override setting will be saved in a file

called <Ethernet address>-phone.cfg on the boot server as well in flash

memory.

Local Web
Server Access

Point your web browser to http://<phoneIPAddress>/.

Configuration pages are accessible from the menu along the top banner.

The web server will issue an authentication challenge to all pages except for
the home page.

Credentials are (case sensitive):

User Name: Polycom

Password: The administrator password is used for this.

Local Settings
Menu Access

Some items in the Settings menu are locked to prevent accidental changes.
To unlock these menus, enter the user or administrator passwords.

The administrator password can be used anywhere that the user password is
used.

Factory default passwords are:

User password: 123

Administrator password: 456

Passwords:

Administrator
password
required.

Network Configuration
SIP Configuration
SSL Security settings
Reset to Default - local configuration, device settings, and file system format

User password
required.

Restart Phone

Warning

Local configuration changes will continue to override the boot server-derived
configuration until deleted through the Reset Local Config menu selection.

Advertising