Philips AJL308 - Manual (Page 2)

English
I. Connecting power
• Connect the supplied mains adapter to the set’s
9V DC jack and the plug into a wall outlet.
II. Setting time and date
1. Press MENU.
2. Use
1 2 to highlight “Clock”.
3. Use 3 4 to select a field of “Time Set” and “Date
(Year-Month-Day)”.
4. Press OK to confirm.
5. Press or hold down
3 4 to set the values.
6. Press OK to confirm.
7. Repeat Steps 3-6 to set other values of “Time Set
and “Date (Year-Month-Day)”.
8. After finishing the setting, press CLOCK,
TUNER, PHOTO/VIDEO or MUSIC to exit
the setup menu.
Helpful hint:
In the clock mode, to zoom the picture displayed,
press and hold CLOCK for around 2 seconds, then
press OK repeatedly to enlarge picture or resume
to normal size, and use
1 2 3 4 to pan the
enlarged picture through. To exit the zoom mode,
press CLOCK again.
III. Setting/Activating alarm time
You can set two different alarm times.
1. Press CLOCK.
2. Hold down ALARM 1 or ALARM 2 for about 2
seconds, then release.
3. Press or hold down 3 4 to set hour.
4. Press ALARM 1 or ALARM 2 to confirm.
5. Press or hold down
3 4 to set minute.
6. Press ALARM 1 or ALARM 2 to confirm.
7. Press again ALARM 1 or ALARM 2 to activate
alarm setting.
➜ When alarm is activated,
displays.
IV. Switching off the alarm
• During alarm call, press any button except
REPEAT ALARM /
BRIGHTNESS CONTROL
.
➜ Alarm will auto reset daily.
OR,
• Press REPEAT ALARM /
BRIGHTNESS CONTROL
.
to enable repeat alarm in 9 minutes.
• To switch off alarm completely, press ALARM 1
or ALARM 2 repeatedly until is changed
to .
➜ When alarm is deactivated, displays. When it
is activated,
displays.
Helpful hint:
• During alarm call, if no button is pressed, alarm call
will last 30 minutes.
• To set the alarm sound with specific music, select
desired music in the “Alarm Music” of the Clock
menu.
V. Tuner
1. Press TUNER.
2. Press MENU.
➜The Tuner menu appears.
3. Press 4 to select “Tuner Auto Program”.
4. Press OK to start the auto search and
programming.
➜ 20 available stations are programmed (FM).
5. Press 3 4 once or more to select your desired
station.
• In TUNER mode, to turn off radio, press OK. To
turn on radio, press OK again.
• To auto tune to a radio station, press and hold
press and hold 1 2 for about 2 seconds, then
release. (To store particular station, refer to
“Manual programming” of Tuner section in the
user manual.)
Before zoom
After zoom
AJL308_98_QSG 23/10/07, 15:10 2