Philips AJL308 - Manual (Page 3)

VI. Using USB device or SD/MMC
To listen to music or view photo or video, you need
to connect a USB device and/or memory card to
AJL308.
1. Plug a compatible USB device and/or memory
card (SD or MMC card) to USB por t and/or card
slot of AJL308.
➜The folder(s) indicating the inserted device(s)
appears.
2. Press 3 4 to select the folder of USB device (if
present) or memor y card (if present).
3. Press OK to open the folder.
➜The set will auto switch to clock mode.
• To switch to music mode, press MUSIC.
• To switch to photo mode, press PHOTO/
VIDEO.
• To switch to video mode, press PHOTO/
VIDEO.
4. Select the file you want to play.
5. Press OK to play.
Helpful hint:
• The set supports DivX and MPEG4 video format.
• You may change still picture display format on the
screen by selecting “Widescreen” or “Normal”
under “Display Format” option in the “General”
menu.
VII. Setting sleep
• In TUNER or MUSIC mode, press SLEEP until
your desired sleep option is displayed.
➜ The current Tuner or Music playback will
continue.
OR,
• In CLOCK or PHOTO/VIDEO mode, press
SLEEP until your desired sleep option is
displayed.
➜ The built-in relaxation music will start playback.
Helpful hint:
• There are several built-in relaxation music, select
your desired one in the “Sleep Timer Music”
option of the “General” menu.
VIII. Brightness control
• Press REPEAT ALARM /
BRIGHTNESS CONTROL
repeatedly to cycle screen brightness through 4
levels.
IX. Screen auto dim
To avoid strong light emitting from the unit at
night time, the auto dim function can be used to
adjust the brightness to the lowest level
automatically.
• To turn on auto dim, in the General menu, set On
in “Auto Dim Timer”, then set desired start time in
“ Auto Dim Start”, and set desired end time in
“Auto Dim End”.
➜ During auto dim time span, press any button to
increase screen brightness, and it will last for 10
seconds.
X. Using the stand
The set is equipped with a stand on the bottom
panel. To set the unit for a different viewing angle,
take the stand out, then place it back by reversing
(see the figure below) the side of the stand.
Wide screen Normal
AJL308_98_QSG 23/10/07, 15:10 3