Nortel Networks Industrial Handset - Manual (Page 11)

DECT Industrial Handset User Guide Issue 02
Galway M1 Design Support
11
4 INITIAL SETUP
4.1 Initial Setup and Operation
The handset can be operated on a maximum of 10 DECT systems. Before you can
make a call via a DECT system, the handset has to be subscribed to the Meridian 1.
A pin code is necessary for the subscription process.
A complete menu tree is located at the end of this document for reference.
4.2 Create Subscription
To subscribe a handset to a system:
1. Press the menu key to enter the menu display and use the or key to
select menu login.
2. Press the key to enter the login display and use the or key to select
subscription create.
3. Press the key to continue subscription and wait until the SEARCH.ID
(PARK) is visible in the display. If there is more than one PARK ID available, ensure
that the correct PARK is selected.
4. Use the or key to select the system number to which the handset has to
be subscribed. Press the key.
Enter the Authentication Code (AC) and press the key.
5. Enter name and/or number (NO) and press the key to complete the
subscription. The handset name can be edited in the subscription edit menu.