Nortel Networks Industrial Handset - Manual (Page 25)

DECT Industrial Handset User Guide Issue 02
Galway M1 Design Support
25
4. Press the key to return to stand-by mode.
6.8 Settings
Within a profile the user can define several settings. These are described in the
following sections. Each setting will have a default as shown in the table below.
6.9 Ringer Tone
There are 9 different ringer tones.
To set a ringer tone:
1. Enter the Set Profile display and use the or key to select ringer tone.
2. Press the key to enter the ringer display. Use the or keys to switch
between ringer types. The handset will produce the ringer sound when a scroll key
is pressed.
3. Press the key to set the visible ringer type. E.g. ringer tone 5. The handset will
return to the Set Profile display.