Nortel Networks Industrial Handset - Manual (Page 19)

DECT Industrial Handset User Guide Issue 02
Galway M1 Design Support
19
If automatic call answering is used, the phone call will be accepted automatically. It is
not necessary to press the key.
5.7 Silent Mode
In Silent mode the handset will use the vibrator instead of ringer and bleep sounds.
To switch the Silent mode ON/OFF:
Press the key immediately followed by the # key to switch the Silent mode ON
or OFF. SILENT is displayed when this option is switched on.
5.8 SOS Button
Press the key to enter Profile Set Up.
Press the key to enter Set Profile.
Press the key two times to select SOS Profile.
Press the key to enter the SOS number.
6 FEATURES DURING CONVERSATION
6.1 Call Transfer
• Press the key to place the call on hold.
• Dial the number to which the phone call must be transferred
• Inform the person at the other end
• Press the key.
• The call is transferred
If the called number does not answer, the original phone call can be resumed by
pressing the key again.
6.2 Call Hold
• Press the key to place the call on hold
• Dial a number.
• Press the key again to resume the original call