Newcon Optik LRF MOD 4EC - Manual (Page 30)

27
b11 – MSB of the result for the second type of measurement
b15 – LSB of the result for the third type of measurement
b17 – MSB of the result for the third type of measurement
Marker E4h is used to separate numbers, 0Dh 0Ah – to separate
data sets.
Type of measurement (bytes b1, b7, b13) can have the following
value:
1 – Distance in meters
2 – Distance in yards
3 – Azimuth in degrees
4 – Azimuth in mils
5 – Elevation in degrees
6 – Elevation in mils
7 – Elevation in meters
8 – Speed in km/h
9 – Speed in MPH
Additional communication features, for special
orders only
Module sends its menu status to the interface every time the
“Mode” button is pressed.
The mode state string has the following structure (in Hex):
S1 S2 S3 S4 0Dh 0Ah,
where