Newcon Optik LRF MOD 4EC - Manual (Page 34)

31
Another cable is required and can be supplied as an option.
To work with GPS, perform the following steps:
ƒ
Switch to PLGr mode;
ƒ Choose either Std1 or Std2 measuring mode;
ƒ Connect the unit to and the GPS unit with the cable.
For each measurement the GPS unit will display the absolute
coordinates of your target.
Note: If the module is not set initially to the Std1or Std2 modes,
GPS connection will not operate properly.
Note: The GPS unit automatically adjusts coordinates to reflect
actual magnetic declination. Therefore, coordinates
displayed on the GPS may differ from those calculated by
the computer.