NetComm NP290W - Manual (Page 13)

NP90W User Guide 1
YML849Rev 1
7.5 Firmware Upgrade
To upgrade the firmware:
1. From the Web User Interface, click
System Menu.
2. Select Firmware Upgrade.
3. Click Browse to locate the new firmware
file. The default file name for a firmware
file is FIRMWARE.IMG.
4. Click Apply. The update may take a few
minutes. Make sure that the power is not
turned off during the update process.
Note: Make sure that the power supply will not be cut off during upgrade.
7.6 Restore to Factory Default
The Web User Interface allows you to reset the device to factory settings. This is similar to pressing the
RESET button.
To reset to the default settings:
1. From the Web User Interface, click System Menu.
2. Select Configuration Tools.
3. Select Restore Factory Default Configuration.
4. Click Apply.
7.7 Backup Settings
HomePlug Wireless Adapter has the capability to save
the current device settings into a file with a BAK
file extension.
To backup device settings:
1. From the Web User Interface, click
System Menu.
2. Select Configuration Tools.
3. Click Backup Settings/
Restore settings.
4. Click Apply. This opens the Configuration Tools page.
5. Click Backup Settings.
6. Click Save file. This opens the File Download dialog box.
7. Click Save.
8. Select the folder to store the file and then click Save. The default file name is CONF.BAK.