NetComm NP290W - Manual (Page 19)

NP90W User Guide 19
YML849Rev 1
Safety Summary Messages
WARNING
HIGH VOLTAGE is used in the equipment. Make sure equipment is properly grounded BEFORE opening. Failure to observe safety precautions
may result in electric shock to user.
CAUTION
Check voltages before connecting equipment to power supplies. Wrong voltages applied may result in damage to equipment.
IMPORTANT SAfETy INSTRUCTIONS
Please read these instructions carefully:
1. The HomePlug Ethernet Adaptor relies on the building’s electrical installation for short-circuit (over current) protection. Ensure
that a fuse or circuit breaker no larger than 120 VAC or 230 VAC (depends on the power supply type in your country) is used on
the phase conductors (all current-carrying conductors).
2. Do not attempt to service the HomePlug Ethernet Adaptor yourself, as opening or removing covers may expose you to dangerous
voltage points or other risks as well as ruin the product warranty. Refer all servicing to qualified service personnel only.