National Instruments Single-Ended Digital Waveform Generator/Analyzer Modules NI SMB-2163 - Manual (Page 5)

© National Instruments Corporation 5 NI SMB-2163 User Guide
Figure 2 shows how the NI SHC68-C68-D2 cable connects the
NI SMB-2163 and the NI digital waveform generator/analyzer.
Figure 2. Connecting a Single-Ended Digital Waveform Generator/Analyzer
to the NI SMB-2163
4. Make signal connections by connecting SMB cables to NI SMB-2163
signal terminals.
Note To ensure a solid ground connection, tighten the SMB connectors by gently
snapping them into place.
1 PXI Chassis with NI Digital Waveform Generator/Analyzer
2 NI SMB-2163
3 NI SHC68-C68-D2 Cable Assembly
2
3
NI PXI-6551 50 MHz Digital I/O
DIGIT
AL D
A T A & CONTR
OL
PFI 0
ACCESS ACTIVE
CLK IN
CLK
OUT
1
NI PXI-1042