National Instruments Isolated Analog Input Modules SCC-AI14 - Manual

USER GUIDE
SCC-AI Series Isolated Analog
Input Modules
The SCC-AI Series isolated analog input modules (SCC-AIXX) can extract
a relatively low-amplitude input signal from a high-common-mode voltage
so the E Series DAQ device can measure the input signal. They also can
amplify and filter the input signal, resulting in higher measurement
resolution and accuracy.
SCC-AIXX modules are available in a range of gains from 0.2 to 200. They
contain lowpass filters of either 10 kHz or 4 Hz bandwidth. Table 1-1 gives
the gain and bandwidth for each module.
Table 1-1. SCC-AIXX Module Input/Output Range, Gain, and Bandwidth
Model Input Range Output Range Gain Bandwidth
SCC-AI01
±42 V ±8.4 V
0.2 10 kHz
SCC-AI02
±20 V ±10 V
0.5 10 kHz
SCC-AI03
±10 V ±10 V
1 10 kHz
SCC-AI04
±5 V ±10 V
2 10 kHz
SCC-AI05
±1 V ±10 V
10 10 kHz
SCC-AI06
±100 mV ±10 V
100 10 kHz
SCC-AI07
±50 mV ±10 V
200 10 kHz
SCC-AI13
±10 V ±10 V
1 4 Hz
SCC-AI14
±5 V ±10 V
2 4 Hz