Unpacking the module – National Instruments Isolated Analog Input Modules SCC-AI14 User Manual

Page 3

Advertising
background image

© National Instruments Corporation

3

SCC-AI Series Isolated Analog Input Modules

One or more SCC-SGXX

SCC-SG Series Strain-Gauge Modules User Guide

SC-2345 User Manual

Read Me First: Safety and Radio-Frequency Interference

SC-2345 Quick Reference Label

68-pin Basic or E Series DAQ device, documentation,
and 68-pin cable

1/8 in. flathead screwdriver

Numbers 1 and 2 Phillips screwdrivers

Wire insulation strippers

NI-DAQ (current version) for Windows 2000/NT/XP/Me

Note

Software scaling of measurements is not supported on the Macintosh operating

system. Refer to the

Scaling Voltage Measurements

section.

Unpacking the Module

SCC modules are shipped in antistatic envelopes to prevent electrostatic
damage (ESD) to the modules. ESD can damage several components on
these products.

Caution

Never touch the exposed pins of connectors.

To avoid damage from ESD when you handle the module, take the
following precautions:

Ground yourself by using a grounding strap or by touching a grounded
object.

Touch the antistatic envelope to a metal part of the computer chassis
before removing the module from the envelope.

Remove the module

from the envelope and inspect the module

for loose

components or any sign of damage. Notify NI if the module

appears

damaged in any way. Do not install a damaged module.

Store the module in the antistatic envelope when it is not in use.

Advertising