Nortel Networks NN43001-321 - Manual (Page 57)

CS 1000 SIP configuration and UDP location dialing 57
Prompt Response Description
zzzz = agent’s position ID (zzzz can be up to 4 digits; up to
7 digits with Directory Number Expansion [DNXP] package
150).
2 MCN 3604 Multiple Call Non-Ringing key
Where yyyy = DN
The DN can be up to 4 digits; up to 7 digits with Directory
Number Expansion (DNXP) package 150. Once the MCN
key has been defined, the MARP prompt appears.
Since MCN and DN are used by the feature to originate
calls, the same DN can be applied to all PCAs.
Configure the Signaling Server using
CS 1000 Element Manager
To configure SIP Converged Desktop Services using CS 1000 Element
Manager, follow the steps in
Procedure 1 "Configuring SIP CDS on the
Signaling Server" (page 57) .
Note: The SIP Trunk Gateway must be configured for SIP CDS. Refer
to IP Peer Networking Installation and Commissioning (NN43001-313)
for detailed instructions.
Procedure 1
Configuring SIP CDS on the Signaling Server
Step Action
1 Log in to Element Manager.
2 Select IP Telephony > Nodes: Servers, Media Cards >
Configuration from the navigator.
The Node Configuration web page opens, as shown in Figure 13
"Node configuration web page" (page 57) .
Figure 13
Node configuration web page
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.