Figure 43 configure telephony routes on mcs 5100, Procedure 9 configure meet me audio conferencing, Procedure 9 – Nortel Networks NN43001-321 User Manual
Page 94: Configure meet me audio conferencing, Figure 43 "configure telephony
94
CS 1000 NRS operation
Figure 43
Configure telephony routes on MCS 5100
Configuring Meet Me Audio Conferencing in the NRS for CDS
To configure Meet Me Audio Conferencing for CDS, you must point the
meetme DID to the convergeddesktop gateway end point as a CDP entry.
Note: You must create the convergeddesktop endpoint before beginning
this procedure. For more information, see
Procedure 9
Configure Meet Me Audio Conferencing
Step
Action
1
Log into the Network Routing Service Manager as admin.
2
Select Configuration > Routing Entries.
3
In the top toolbar, select the set Standby DB view radio button.
4
In the Routing Entries section, from the pulldown lists, select the
<Domain name>, the <L1 level>, and the <L0 level>.
5
In the Gateway Endpoint field, select convergeddesktop.
6
In the With DN Type field, select the DN Type and click Show.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321
01.05
Standard
Release 5.0
15 February 2008
Copyright © 2005-2008, Nortel Networks
.