NISSAN 2010 Z Coupe User Manual

Page 311

Advertising
background image

Black plate (311,1)

Model "Z34-D" EDITED: 2009/ 9/ 10

SCE0504

2. Loosen each wheel nut one or two turns by

turning counterclockwise with the wheel nut
wrench. Do not remove the wheel nuts
until the tire is off the ground.

3. To lift the vehicle, securely hold the jack lever

and rod with both hands as shown above.
Carefully raise the vehicle until the tire clears
the ground. Remove the wheel nuts, and
then remove the tire.

SCE0661

Installing the spare tire

The T-type spare tire is designed for
emergency use. (See specific instructions
under the heading “WHEELS AND TIRES”
in the “8. Maintenance and do-it-yourself”
section.)

1. Clean any mud or dirt from the surface

between the wheel and hub.

2. Carefully put the spare tire on and tighten

the wheel nuts finger tight. Check that all the
wheel nuts contact the wheel surface
horizontally.

In case of emergency

6-5

Advertising
This manual is related to the following products: