NISSAN 2010 Z Coupe - Manual (Page 316)

Black plate (316,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
SCE0775
Type A
Type A:
1. Remove the NISSAN Genuine Emergency
Tire Sealant and the air compressor.
2. Check the expiration date of the sealant
(shown on the label attached to the bottle).
Never use a sealant whose expiration date
has passed.
3. Shake the sealant bottle well
*
1 .
NOTE:
Make sure to shake the bottle well
before attaching the hose. Doing so
afterward may cause the repair com-
pound to splatter.
4. Remove the cap from the bottle and screw
the sealant filler tube into the bottle
*
2 .
5. Remove the cap of the valve from the flat
tire, and deflate the tire completely by
pushing the valve core using the valve core
tool
*
3 .
WARNING
Remove the valve core carefully. Air
pressure remaining in the tire can cause
it to fly out.
6. Remove the valve core using the valve core
tool
*
4 . Keep it free of dirt.
7. Remove the plug from the sealant filler tube
and insert the tube into the tire valve
*
5 .
8. Hold the bottle upside down and squeeze it
repeatedly until the sealant is injected into
the tire
*
6 . After the sealant is completely
injected, pull the tube out of the valve. Install
the tire valve core securely into the valve
using the valve core tool.
Do not throw away the empty sealant
bottle. This bottle is necessary when
the tire is repaired or replaced by a
NISSAN dealer.
9. Put the “Sealant-applied” sticker on a flat
6-10 In case of emergency