Chapter 1 configuring your internet connection, What you need before you begin, What you need before you begin -1 – NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User Manual
Page 17
1-1
v1.0, May 2008
Chapter 1
Configuring Your Internet Connection
This chapter describes how to configure your ADSL2+ Modem Wireless Router Internet
connection. When you perform the initial configuration of your modem router using the Resource
CD as described in the NETGEAR Router Setup Manual, these settings are configured
automatically for you. This chapter provides further details about these settings, as well as
instructions on how to log in to the modem router for further configuration.
This chapter includes:
•
“Logging In to the Modem Router”
•
“Using the Smart Wizard to Set Up Your Router”
•
“Logging In to the Modem Router”
•
“Using the Setup Wizard to Auto-Detect Your Internet Connection”
•
“Viewing or Manually Configuring Your ISP Settings”
•
•
“How the Internet Connection Works”
What You Need Before You Begin
You need to prepare the following before you can set up your Product Family:
•
Active Internet service provided by an ADSL account.
•
The Internet Service Provider (ISP) configuration information for your ADSL account.
–
ISP login name and password
–
ISP Domain Name Server (DNS) addresses
–
Fixed or static IP address
–
Host and domain names
Note: NETGEAR recommends using the Smart Wizard on the Resource CD for initial
configuration, as described in the NETGEAR Wireless ADSL2+ Modem Router
Setup Manual.