Network Technologies NODEMUX ST-NXM-U-HD - Manual (Page 14)

10
Administrator Password (cont'd)
Function:
Keystroke:
Save new password. (The
administrator will be prompted
for a Yes or No confirmation)
Return to Administration Mode
User Name List
To enter the User Name List press <U> from the Administration Mode menu.
The User Name List (see Fig. 6) enables the administrator to see a list of users. The administrator can select either an existing
user to modify user settings, or an empty record to add a new user.
Function: Keystroke:
Edit the highlighted user's
access rights in System
Access List
Enter Edit mode to add/change/
remove users
Change the highlighted
user's password
Return to Administration Mode
Figure 6- User Name List
System Access List
To enter the System Access List, press <Ctrl> + <A> from the User Name List. The System access list displays the ports so that
the Administrator can change access rights for the selected user. That user’s name is displayed at the top of the access list. Use
the mouse to change access rights by clicking on a given number to toggle the port's status.
Function: Keystroke:
Save the changes to the
access list and return to
previous mode
Exit the System Access
List without saving and
return to previous mode
Esc
Esc
Enter
(If Password string and Verify Password string
are different, this command will have no effect,
enabling the administrator to correct the password)
A
Ctrl
+
E
Ctrl
+
P Ctrl
+
Esc
Enter