Network Technologies NODEMUX ST-NXM-U-HD - Manual (Page 18)

14
Search Mode (cont'd)
Function:
Keystroke:
Select the next port
Add a character to the search
string and select the best
matching CPU name
Exit Search Mode, return to
Command mode
Maintenance Mode
To enter Maintenance Mode (see Fig. 8) press <Ctrl>+<M> from the Command Mode menu.
Maintenance Mode enables a user to customize the On Screen Display to their requirements. Also, the Security Mode can be
activated/deactivated from this menu.
Function: Keystroke:
Reset all of the port names
Toggle between numeric and
alphabetic listing of ports
Move On Screen Display (OSD)
menu up on monitor
Move OSD menu down on
monitor
Move OSD menu to the right
Move OSD menu to the left
Make OSD menu taller
Make OSD menu shorter
Figure 8- Maintenance Mode menu
Activate security features.
Present only when security is
available but not active.
Enter Administration Mode.
Option present only when administrator
is logged in.
A-Z
0-9
(Type any alphabetical or numeric character)
Esc
Enter or
R
L
T
S
A
NOTE: If activating security features, the user will be
prompted for a “Y” (yes) or “N” (no) to confirm the
menu choice, at which point the user will be asked
for a username and password before continuing.
Only the administrator can activate the security
features.