Network Technologies NODEMUX ST-NXM-U-HD - Manual (Page 17)

13
Edit Mode
To activate Edit Mode press <Ctrl> + <E> from the Command Mode menu.
Edit Mode allows only the administrator to modify the names of the CPUs connected to the switch. Names of CPUs can be up to
12 characters in length. Characters typed can be upper or lower case. After changes have been made the administrator will be
prompted by the menu to save the changes. Answer "Y" to save changes and answer "N" to continue using previously entered
port names.
Function: Keystroke:
Move cursor one position
to the right
Move cursor one position
to the left
Move cursor to the
previous port
Move cursor to the
next port
Select the first port on the switch
Select the last port on the switch
Toggles between insert and
overstrike
Erase current character
Erase previous character
When finished making changes in Edit Mode, press <Esc> and a prompt will appear to press either <Y> to save the changes or
<N> to continue making changes without saving the changes just made.
Search Mode
Search Mode is enabled by typing any alphabetical or numeric characters while in the Command Mode menu.
Search Mode allows the user to enter and maneuver through a list of CPU names. The CPU name best matching the characters
typed is selected. The list of CPUs may also be searched for a specific (or similar) name. The following commands are valid when
the search option has been invoked from Command Mode.
Function: Keystroke:
Erase previous character
in search name
Select the previous port
NOTE: If a change has been made, using the up or down arrow
will also prompt the user to save any changes.
End
Home
Insert
Character either gets inserted and the remaining
characters shift to the right, or characters get
overwritten.
Delete
Backspace
Backspace