National Instruments NI 5422 - Manual (Page 24)

NI 5422 Specifications 24 ni.com
Start Trigger
DDC CLK IN
Clocking
Format DDC Data Output signals change on the rising edge of
DDC CLK IN. —
Frequency
Range 10 Hz to 200 MHz —
Input Duty
Cycle
Tolerance 40% to 60% —
Table 8.
Specification Value Comments
Sources 1. PFI<0..1> (SMB front panel connectors)
2. PFI<2..3> (DIGITAL DATA & CONTROL front panel
connector)
3. PXI_Trig<0..7> (backplane connector)
4. PXI Star trigger (backplane connector)
5. Software (use function call)
6. Immediate (does not wait for a trigger). Default.
—
Modes 1. Single
2. Continuous
3. Stepped
4. Burst
—
Edge Detection Rising —
Minimum
Pulse Width 25 ns. Refer to t
s1
at NI Signal Generators Help»Devices»
NI 5422»NI PXI-5422»Triggering»Trigger Timing.
—
Table 7. (Continued)
Specification Value Comments