National Instruments NI 5422 - Manual (Page 35)

© National Instruments Corporation 35 NI 5422 Specifications
Physical
Table 16.
Specification Value Comments
Dimensions 3U, One Slot, PXI/cPCI Module
2.0
Ч 13.0 Ч 21.6 cm (0.8 Ч 5.1 Ч 8.5 in.)
—
Weight 352 g (12.4 oz) —
Front Panel Connectors
Label Function(s) Connector Type —
CH 0 Analog Output SMB (jack)
CLK IN Sample clock input and PLL
reference clock input. SMB (jack)
PFI 0 Marker output, trigger input,
sample clock output,
exported trigger output, and
PLL reference clock output. SMB (jack)
PFI 1 Marker output, trigger input,
sample clock output,
exported trigger output, and
PLL reference clock output. SMB (jack)
DIGITAL
DATA &
CONTROL Digital data output, trigger
input, exported trigger
output, markers, external
sample clock input, and
sample clock output. 68-pin VHDCI female
receptacle
Front Panel LED Indicators
Label Function For more
information, refer
to the NI Signal
Generators Help.
ACCESS LED The ACCESS LED indicates the status of the PCI bus and
the interface from the NI 5422 to the controller.
ACTIVE LED The ACTIVE LED indicates the status of the onboard
generation hardware of the NI 5422.
Included Cable
— 1 (NI part number 763541-01), 50
Ω, BNC Male to
SMB Plug, RG223/U, Double Shielded, 1 m cable.
—