Nortel Networks NORSTAR P0886634 - Manual (Page 10)

4 Introduction to Norstar Voice Mail FAX
FAX Installation Guide P0886634 Issue 1.0
Precautions
Before installing or upgrading a DFC, you must take the following precautions:
• Shut down the Norstar Voice Mail system —A shutdown procedure allows
Norstar Voice Mail to perform all necessary shutdown activities before power
is removed. For more information, refer to
"Shutting down the Norstar Voice
Mail system" on page 6.
• Unplug the NAM power cord —The NAM power supply contains high
voltage. If you do not unplug the power cord, you may severely injure yourself.
Also, if cards are installed or removed from the NAM before the power cord is
unplugged, the cards and/or the NAM may be damaged.
• Wear an antistatic ground strap —Static electricity can damage the
components on the cards and the NAM. Always wear a properly grounded
antistatic strap while handling the DFC, DVC, BIC or any other Norstar Voice
Mail component. Ground yourself by attaching one end of the grounding strap
to your wrist and the other end to a grounded metal surface.
Enabling the FAX software
The FAX option must be enabled after installing the DFC. Refer to "Enabling the
FAX software" on page 13, or "Enabling the FAX software" on page 27 for
instructions on how to enable the FAX option.
After FAX capability is added to Norstar Voice Mail, you can add or customize Fax
Overflow and Fax-on-demand information. For more information about
customizing the FAX software, refer to the
Norstar Voice Mail FAX Set Up and
Operation Guide .