Nortel Networks NORSTAR P0886634 - Manual (Page 27)

Installing the DFC on systems equipped with a BIC 21
P0886634 Issue 1.0 FAX Installation Guide
Figure 15 BIC connection points
7. Lightly press the BEC daughterboard down onto the female BEC
daughterboard connectors on the BIC. The BIC connection screw hole posts
should be flush with the BEC daughterboard screw holes. For the location of
the BIC and BEC daughterboard connection points, refer to Figure 15.
8. Before pressing the BEC daughterboard completely down, ensure the male
BEC daughterboard connectors line up with the female BEC daughterboard
connection points on the BIC.
9. Fasten the BEC daughterboard to the BIC connection screw hole posts using
the two screws provided. For the location of the BIC and BEC daughterboard
connection points, refer to Figure 15.
10. Insert the BIC back into the NAM. Refer to "Re-installing the BIC in the
NAM" on page 22.
11. Replace the front cover.
12. Plug the power cord into the AC outlet.
Female BEC daughterboard connection points
Connection post screw hole posts PEC Slots (4)
Fiber connectors