Navigon MobileNavigator 5 - Manual (Page 114)

User's manual MobileNavigator | 5
- 112 - Settings
8.1.7 Speed limit
Speed control On the S
PEED LIMIT
screen, you may effect the following
modifications:
Setting Significance
Show traffic signs This command indicates whether signposts
indicating speed limits are currently being
displayed or not.
Tap the Show traffic signs command and
select whether speed limits should be
displayed
Always
On speeding only or
Never.
Warning in built-up
areas This command indicates from how much
speeding on you want to be warned when
driving within built-up areas.
Tap the Warning in built-up areas
command to select another value or to set
it to Never.
Warning outside
built-up areas This command indicates from how much
speeding on you want to be warned when
driving outside built-up areas.
Tap the Warning outside built-up areas
command to select another value or to set
it to Never.
Note: This information can only be displayed when it is contained
in the cartographic material.
Caution: Information contained in the cartographic material can
be wrong, e.g. due to road works.
Traffic situation and road traffic regulations are absolutely prior
to the information given by the navigation system.