Navigon MobileNavigator 5 - Manual (Page 122)

User's manual MobileNavigator | 5
- 120 - Annex A: Equipping the GPS-receiver
9.1 Annex A: Equipping the GPS-receiver
Expansion modules At any moment, the GPS receiver may be equipped with the
Bluetooth module (for wireless data transmission) and / or with
the TMC module (to provide traffic information to your navigation
system).
For detailed information, refer to the enclosed short manual.
9.1.1 TMC module
Equipping the GPS
receiver with the
TMC module…
1. Disconnect any cable from the GPS receiver.
2. Insert the TMC module.
3. Reconnect the cables.
4. Plug the jack of the aerial supplied within the delivery into the
respective socket of the GPS receiver.
Note: Instead of using the supplied aerial you may connect
the receiver to the external vehicle antenna using a Y-
adapter. This Y-adapter is available from our support team,
from our online-shop, or from your local dealer.
5. Turn the GPS receiver on.
Initialisation of the
TMC module The initialisation process of the TMC module starts automatically.
Within a few seconds, the colour of the TMC icon in
MobileNavigator changes from No TMC to No signal and
finally to TMC ready.
For details on the functionality of your TMC module, please refer
to "Using TMC functionality", page 100.