NETGEAR DM602 User Manual
Page 32
Reference Manual for the Model DM602 ADSL Modem
3-8
Preparing Your Computer
Verifying TCP/IP Properties for Macintosh Computers
After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by
returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.
The panel is updated to show your settings, which should match the values below if you are using
the default TCP/IP settings that NETGEAR recommends:
•
IP addresses—192.168.0.2 through 192.168.0.253
•
The subnet mask is 255.255.255.0
•
The default gateway is 192.168.0.1
If you do not see these values, you may need to restart your Macintosh or you may need to switch
the “Configure” setting to a different option, then back again to “Using DHCP Server”.
DM602.book Page 8 Friday, October 4, 2002 4:22 PM