NEC Versa Series - Manual (Page 26)

2-6 Getting Started
Powering On Your System
Power on the system as follows:
1. Locate the latch on the front of the unit, slide it to the right, and raise the LCD
panel.
2. Locate the Power button and slide it forward to turn on system power. For
additional information about Power control buttons and power LEDs, refer to
Chapter 1, “Introducing the NEC Versa.”
Note When powering on your NEC Versa notebook running the Windows 2000
operating system, you may encounter a warning message suggesting that a problem
exists with the hibernation file on your system. The warning message is inaccurate. To
disable this message, simply enable hibernate support. See the section, “Windows 2000
Hibernate,” in Chapter 3, for details about enabling hibernate support.
Primary Battery Pack
The NEC Versa notebook comes with rechargeable Lithium Polymer (Li-Poly) battery
behind the LCD panel. This battery is not user-replaceable.
Secondary Battery Pack
The NEC Versa notebook comes with a secondary rechargeable Lithium Ion (Li-Ion)
battery pack that is easy to install and remove.
Secondary Lithium-Ion battery
A – Battery Connectors B – Alignment Grooves