NEC Versa Series - Manual (Page 60)

Using the Operating System and Utilities 4-5
Product Recovery CD
The Product Recovery CD contains the NEC Product Recovery Utility that allows you
to restore your system to its initial installation state.
If you determine that you need to restore your system to its initial installation state
follow the instructions provided here.
Note
Only use the Product Recovery utility to restore your system to its initial
installation state as a last resort. Check the problem checklist in Chapter 10 for
information about solving problems before using the CD. The Product Recovery utility
provides options that either remove or replace existing files, a process that may result in
data loss.
Before using the Product Recovery CD, enter the BIOS Setup utility and restore the
BIOS default settings. Save the default settings before exiting the BIOS Setup utility.
Guidelines for Using the Product Recovery CD
Follow these guidelines when using the Product Recovery CD.
!
Use AC power.
!
Remove all optional hardware such as PC Cards, USB devices, printers, and
monitors.
Product Recovery CD Options
The Product Recovery CD and Utility provides you with a number of choices. Move
the cursor over each selection on the NEC Product Recovery Utility screen to display a
description of the selection in the window at the right side of the screen.
!
Restore System — Select this option if you wish to restore your hard disk drive to
its initial installation state. Restore System allows you to restore your system in one
of the following ways.
— Full Disk Drive — Completely rebuilds your hard disk drive, destroying all
existing data in the process.
Note
Use the Full Disk Drive restore option if your hard disk consists of one
partition (drive).