NEC Versa Series - Manual (Page 30)

2-10 Getting Started
4. Continue to hold the battery release latch as you slide the battery out of the system.
Removing the battery
A – Battery Bay Connectors C – Secondary Li-Ion Battery
B – Battery Bay Release Latch
5. Insert the new battery as follows:
!
Locate the alignment grooves on the edge of the battery.
!
Locate the alignment grooves inside the battery bay.
!
Align the grooves on the battery with the grooves in the bay.
!
Slide the battery into the bay until securely locked into place.
Inserting the battery
A – Battery Bay Connectors C – Alignment Grooves
B – Battery Bay Release Latch D – Secondary Li-Ion Battery
6. Turn over the system.