NEC Versa Series - Manual (Page 51)

Using the BIOS Setup Utility 3-17
Updating the BIOS
The BIOS is code transmitted onto your system’s Flash ROM. As indicated in this
chapter, you use the BIOS Setup utility to configure your system’s software and
hardware features. Use the BIOS Update Diskette for your specific model to update
your NEC Versa system BIOS.
Note
You only need to update the BIOS if NEC Computers makes significant
improvements or fixes to the current system BIOS. Your authorized NEC dealer or NEC
support representative can help you determine this.
To update the system BIOS you must:
!
Obtain the BIOS Update
!
Prepare the BIOS Update Diskette
!
Perform the BIOS Update
Obtaining the BIOS Update
If you are informed that the default BIOS needs an update contact the NEC Computers
Support Services at (800) 632-4525, Fax (801) 579-1552, or access the web site,
www.neccomp.com to obtain a copy of the BIOS update.
Note
If you purchased and are using this computer outside the U.S. or Canada,
please contact a local NEC or dealer in your country.
Preparing the BIOS Update Diskette
Before using the BIOS update diskette you must make the diskette BIOS flash ready.
Refer to the readme.txt file on the diskette before using the diskette.
Follow these instructions to prepare the BIOS Update Diskette.
1. Scan your hard drive for any computer viruses.
2. Enable the diskette for write access.
3. Insert the diskette into the diskette drive.