NETGEAR WGPS606 - Manual (Page 28)

Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch
4-2 Management
202-10083-01
Table 4-1. General Information Fields
Field Description
Wireless Settings
These parameters apply to the target remote WGPS606, VPN gateway, or
VPN client.
Network Name (SSID) Displays the wireless network name (SSID) being used by the wireless port
of the wireless USB print server. The default is NETGEAR.
Connection Status Identifies if the wireless USB print server has a wireless connection.
Signal Strength The wireless signal strength.
Channel Identifies the channel the wireless port is using.
Security
Identifies the option the wireless USB print server is using.
IP Settings
These parameters apply to the WGPS606 wireless USB print server.
IP Address The IP address of the wireless USB print server.
Subnet Mask
The subnet mask for the wireless USB print server.
System
Name The default name can be changed if desired.
Device MAC Address Displays the Media Access Control address (MAC Addresses) of the
wireless USB print server.
Wireless MAC Address Displays the Media Access Control address (MAC Addresses) of the
wireless USB print server’s wireless port.
Firmware Version The version of the firmware currently installed.
Printers
These parameters apply to the Local WGPS606 wireless USB print server.
LPT1 Idle, printing, no paper, or error information for the printer connected to
USB port 1.
LPT2 Idle, printing, no paper, or error information for the printer connected to
USB port 2.