Wiring an isolated output to an external load, Wiring an isolated output to an external load -13 – National Instruments NI PCI-8254R User Manual
Page 24
Advertising
Chapter 2
Digital I/O
© National Instruments Corporation
2-13
Wiring an Isolated Output to an External Load
The digital output circuit sources current to external loads, as shown in the
following figure.
Caution
Do not draw more than 100 mA from 24 V or 30 V isolated outputs. Do not draw
more than 50 mA from 5 V isolated outputs.
Digital Output
V
C
Vcc
NI 8254R
Load
Advertising